This course set is designed for experienced personnel who are required to work in confined spaces, gas test atmospheres and conduct work activities under the authority of an issued permit to work and within the context and requirements of that permit within the construction, resources and infrastructure industries.
It is designed to teach participants how to identify confined space hazards, work safely within confined spaces according to an issued permit and operate various confined space safety equipment. Finally, this course set applies to individuals who may be required to carry out gas testing of an atmosphere prior to entering a specific area or workspace. These working environments may be hazardous, unpredictable, subject to time pressure, chaotic and expose responders to risk, on land or water, by day or night. Or workplace atmospheres which may include visible and invisible hazards and hazardous surfaces.
Students will demonstrate how to enter, exit and work safely in a confined space according to an issued permit for two scenarios. Participants will also inspect and select appropriate personal protective gear; operate various confined space safety equipment including atmospheric gas testing/monitoring devices and interpret the results to take appropriate action; and conduct routine servicing of all equipment and gear.
The delivery mode for this course is face to face learning and assessment. The course takes approximately 7 hrs to complete.
For further information please click on the Course Delivery Mode and Assessment Information tab.
Training and assessment delivered on behalf of Allens Training Pty Ltd RTO 90909.
Course Delivery Mode:
Face to Face Learning and Assessment (7 Hrs)
– Perform a horizontal and a vertical entry into a confined space
– Confirm the scope and location of the work to be conducted
– Identify and raise the type of work permit required
– Prepare for permitted work
– Identify hazards and check hazard controls specified on the permit are consistent with the hazard analysis
– Use atmospheric monitoring devices prior to entering the confined space
- Interpret readings and take required action
- Maintain testing and monitoring equipment
– Monitor work for compliance and respond appropriately to changing conditions and circumstances
– Seek variation to permit/ new permit if job or work environment vary from that specified in the permit
– Formally see and receive authorised extensions to the permit when required
– Identify and act on incidences of non-compliance and report promptly to relevant personnel
– Withdraw/cancel permit if conditions warrant it
– Provide an end-of-day status report
– Check the work conducted against the issued permit to ensure that all nominated work requirements have been satisfied
– Demonstrate concluding operation techniques
Documentation – The student must complete all documentation according to the required standard:
- Complete two Job Safety Environmental Analysis (JSEA)/ Safe Work Methods Statement (SWMS) forms
- Apply for and obtain a Confined space entry permit for both scenarios – horizontal and vertical entry
- Record results from testing of atmosphere
- Complete work permit documentation
Theory assessment – A written assessment consisting of short-answer and multiple-choice questions. The student must complete all assessment questions.
An individual undertaking this course with Allens Training Pty Ltd will need to demonstrate the following to be eligible for entry:
- Psychological* and physical capability to be able to meet the demands of the practical demonstrations for this course, such as the undertaking of the requirements to safely enter, work in and exit a confined space wearing appropriate PPE. This may involve climbing up, down, through or under structures or confined spaces, being temporarily suspended, wearing harnesses and other relevant PPE, dragging and lifting in confined and restricted environments in dark, low light or smoke–filled areas.
- Protective footwear/safety shoes and comfortable/practical clothing must be provided by the student and worn during the practical sessions and assessment
- Language, literacy and numeracy requirements – students must be able to read and correctly interpret required documentation relevant to the confined space entry, speak clearly and unambiguously in English, explain, describe and verify sometimes complex needs and issues and understand the permit requirements. Writing is required to the level of completing workplace forms and producing any required reports. Numeracy is required to the level of being able to correctly differentiate between high and low pressures and temperatures, voltages or masses and interpret gas test/monitoring results.
*Safe Work Australia notes “Working in a confined space may impose physiological and psychological demands over and above those encountered in a normal working environment. Consideration should be given to a worker’s:
- physical ability;
- ability to work in a restrictive space (for example claustrophobia) and ability to wear the PPE required to do the work (for example respirators).”
From 1st January 2015, it is a government requirement to have a Unique Student Identifier Number (USI) for all nationally recognised courses that you attend.
Click below for assistance and information on how to obtain your USI.
The following units will be included in your certificate:
- RIIWHS202E – Enter and work in confined spaces
- MSMPER200 – Work in accordance with an issued permit
- MSMWHS217 – Gas test atmospheres
- MSMPER200 – Work in accordance with an issued permit
This Certificate is issued by our Training Partner, Allens Training Pty Ltd RTO #90909
In response to COVID-19, we have implemented the following changes to our courses:
- Implemented an online learning component for some of our First Aid and selected healthcare courses, reducing the contact time for classes.
- Class sizes have been reduced to a maximum of 12 people to ensure adequate social distancing is maintained.
- Bag Valves Masks are used in substitution for rescue breaths during CPR training.
- Each student has their own equipment.
- Students are required to wash their hands at the start of the course and use disposable gloves throughout.
- Each student wipes down equipment using disposable disinfectant wipes.
- Manikins are cleaned by the staff at the end of each session.
On arrival at the centre:
- Students are requested to use hand gel on entry.
- Register on the Safe WA app or complete the register located at reception.
- Sign-in for a course is done using a tablet.
- No one is permitted to be in the centre until 10 minutes prior to a course.
To ensure you can successfully complete your practical training we ask the following:
- Arrive 10 minutes prior to the course start time. (Please note that if you arrive late you will not be able to attend the course).
- Wearing appropriate attire.
- Including enclosed shoes, pants and shirt.
- Verify your USI.
- Provide photo ID upon entry.
- Register on the Covid-19 Contract Registry.
If the student does not meet the above requirements, they will be unable to attend there practical training.
We understand there are times when you may need to make a change to your booking. If this is the case please get in touch with us via email, firstname.lastname@example.org
For all requested booking changes, more than 48hrs (2 business days) prior to a course, no rebooking fee will apply. If the request is less than 48hrs (2 days) prior to a course no changes, including refund requests can be made.
All requested changes to a booking must be made in writing.
In the event of a cancellation request by a customer, a voucher will be issued to the value of the amount paid. This voucher can be used to book any future courses with us.